Changes between Version 64 and Version 65 of BuildInstructions


Ignore:
Timestamp:
05/31/17 17:50:19 (4 months ago)
Author:
ryan
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • BuildInstructions

    v64 v65  
    2121[[Image(http://microfluidics.utoronto.ca/dropbot/media/dropbot-merged-gerber.jpg, nolink)]] 
    2222 
    23 You'll need to solder the PCBs yourself, or alternatively, you can have them assembled by a 3rd party (e.g., [http://www.goldphoenixpcb.com/html/asmprice/SMT-Specials.html Gold Phoenix]), though assembly can be prohibitively expensive for small volumes. If you do decide to have boards assembled by Gold Phoenix, you may be able to save on the stencil fee (~$200/board design), since they should have stencils on file from previous orders. Note that each of the following links points to a zip files that was used to fabricate batch of a single design (Note that the {{{*.pos}}} files and BOMs have been updated to fix some errors, but the stencils should remain unchanged). 
     23You'll need to solder the PCBs yourself, or alternatively, you can have them assembled by a 3rd party (e.g., [http://www.goldphoenixpcb.com/html/asmprice/SMT-Specials.html Gold Phoenix]), though assembly can be prohibitively expensive for small volumes. If you do decide to have boards assembled by Gold Phoenix, you may be able to save on the stencil fee (~$200/board design), since they should have stencils on file from previous orders. Note that each of the following links points to a zip file that was used to fabricate batch of a single design (Note that the {{{*.pos}}} files and BOMs have been updated to fix some errors, but the stencils should remain unchanged). 
    2424 
    2525* control board v2.1.1: [http://microfluidics.utoronto.ca/downloads/RYFO01CAO17242-control_board_v2.1.1-Rev2.zip RYFO01CAO17242]