Skip to content
Snippets Groups Projects
Commit ff33e3cc authored by Michael DM Dryden's avatar Michael DM Dryden
Browse files

Changed print tolerances, condensed into one file.

parent 756753cd
Branches
No related merge requests found
Hide whitespace changes
Inline Side-by-side
.gitmodules
+ 0
− 3
View file @ ff33e3cc
[submodule "MCAD"]
path = MCAD
url = https://github.com/SolidCode/MCAD.git
[submodule "gearCreator"]
path = gearCreator
url = https://github.com/VladAlpha/gearCreator.git
gearCreator @ c1e9da4d
Compare c1e9da4d...c1e9da4d
Subproject commit c1e9da4d2745294f08f41699aee3ca49204904e9
magnet holder.scad
+ 29
− 25
View file @ ff33e3cc
......@@ -4,22 +4,24 @@ include <MCAD/nuts_and_bolts.scad>;
include <MCAD/involute_gears.scad>;
include <MCAD/regular_shapes.scad>;
tolerance = 0.15;
// gear parameters
circular_pitch=350;
//diametralPitch=12;
//numberOfTeeth=10;
pressureAngle=25;
centerAngle=25;//angle at center of teeth
backlash=.4;
motorShaftDiameter=5+2*tolerance; // motor shaft
// magnet
magnetWidth=25.42;
magnetLength=76.14;
magnetHeight=19.02;
magnetWidth=25.42+tolerance*2;
magnetLength=76.20+.4+tolerance*2;
magnetHeight=19.02+tolerance*2;
// guide rods
rodRad=3;
linearBearingOD=12;
linearBearingHeight=19;
rodRad=3+tolerance;
linearBearingOD=12+tolerance*2;
linearBearingHeight=19+tolerance*2;
union(){
......@@ -49,7 +51,6 @@ union(){
color("Purple") endPlate(30);
}
//color("red") magnetPlate(30);
// Magnet plate
module magnetPlate(spacing = 30){
......@@ -90,6 +91,7 @@ module magnetPlate(spacing = 30){
}
}
}
module pillar(spacing = 30){
thickness = 10;
width = 50;
......@@ -105,9 +107,10 @@ module pillar(spacing = 30){
difference(){
cube([length,width,thickness]);
for (r_z = [0,180]){
translate([length/2, width/2, 0])
translate([length/2, width/2, thickness/2])
mirror([0,0,1]) //flip nut holes to top for easier printing
rotate([0,0,r_z])
translate([-length/2, -width/2, 0]) // center piece before rotation
translate([-length/2, -width/2, -thickness/2]) // center piece before rotation
for (y = [width/2-spacing/2, width/2+spacing/2]){ // M3 nut/bolt holes
translate([length-5, y, -1])
rotate([0,0,-90])
......@@ -162,6 +165,7 @@ module endPlate(spacing = 30){
}
}
}
module motorSide(){
$fn=50;
thickness = 4;
......@@ -177,7 +181,7 @@ module motorSide(){
cube([length, width, thickness], center = true);
linear_extrude(height = thickness+1)
stepper_motor_mount(17);
stepper_motor_mount(17, tolerance=tolerance);
}
for (y = [-1, 1]){ // bearing blocks
......@@ -202,24 +206,22 @@ module motorSide(){
}
}
}
}
rotate([0,0,180])
translate([length/2-3, 0, 0]){
translate([0, 0, (thickness+2)/2])
translate([length/2-2, (magnetLength+5+2*(rodRad+3))/2, 0]){
translate([0, 0, (thickness)/2])
difference(){
cube([10.6, 19.8, thickness+2], center = true);
cube([11, 3, thickness+3], center = true);
cube([10.6, 19.8, thickness], center = true);
cube([11, 3, thickness+1], center = true);
}
}
}
rotate([0,0,180])
translate([length/2-3, 0, thickness+2])
microswitch(mockup = true, holeDepth = thickness+5, nutSpacing = 3);
translate([length/2-2, (magnetLength+5+2*(rodRad+3))/2, thickness])
microswitch(mockup = true, holeDepth = thickness+5, nutSpacing = 1.5);
}
}
......@@ -258,7 +260,7 @@ module pinion(teeth){
trap_width = 6; //nut trap width across flats
hardware_bore = 3.4; //set screw clearence hole
bore_diameter = innerRadius;
bore_diameter = motorShaftDiameter;
//sets nut trap boss dimensions
boss_length = 15/2 + 1;
......@@ -277,7 +279,8 @@ module pinion(teeth){
hub_diameter=15,
bore_diameter=bore_diameter,
circles=4,
twist=twist);
twist=twist,
backlash=backlash);
difference()
{
......@@ -294,7 +297,8 @@ module pinion(teeth){
hub_diameter=17,
bore_diameter=bore_diameter,
circles=4,
twist=twist);
twist=twist,
backlash=backlash);
translate([bore_diameter/2, -boss_width/2, height/2]) //center the cube
cube([boss_length-bore_diameter/2, boss_width, height/2]); //boss the set screw lives in
......@@ -322,8 +326,8 @@ module microswitch(mockup = true, holeDepth = 0, nutSpacing = 0){
for (y = [5.1,14.6]){
translate([2.9, y, -holeDepth]){
cylinder(h=6.4+holeDepth, r=2.5/2); //M2.5 holes
hexagon_prism(height = holeDepth-nutSpacing, radius = 2.55);
cylinder(h=6.4+holeDepth, r=2.5/2+tolerance); //M2.5 holes
hexagon_prism(height = holeDepth-nutSpacing, radius = 2.55+tolerance);
}
}
}
......
magnet holder_print.scad deleted 100644 → 0
+ 0
− 332
View file @ 756753cd
include <rack_herringbone.scad>;
include <MCAD/motors.scad>;
include <MCAD/nuts_and_bolts.scad>;
include <MCAD/involute_gears.scad>;
include <MCAD/regular_shapes.scad>;
tolerance = 0.15;
// gear parameters
circular_pitch=350;
pressureAngle=25;
centerAngle=25;//angle at center of teeth
backlash=.4;
// magnet
magnetWidth=25.42+tolerance*2;
magnetLength=76.14+tolerance*2;
magnetHeight=19.02+tolerance*2;
// guide rods
rodRad=3+tolerance;
linearBearingOD=12+tolerance*2;
linearBearingHeight=19+tolerance*2;
union(){
translate([-80,0,0]){
translate([-10,0,0])//
color("blue") magnetPlate();
color("red") pillar(30);
translate([0,0,-20])//
translate([40,0,-15])
motorSide();
translate([0,0,30])//
color("orange")
translate([40,0,2])
rotate([0,180,360/10*-.15])
pinion(10);
color("green")
translate([40,0,20])
for (y = [-1,1]){
translate([0, y*(magnetLength+5+2*(rodRad+3))/2, 0])
bearingClamp();
}
}
translate([10,0,0])//
color("Purple") endPlate(30);
}
//motorSide();
// Magnet plate
module magnetPlate(spacing = 30){
thickness = 12;
thicknessMin = 7;
length = magnetLength+5;
$fn=50;
union(){
difference(){// rod holders
for (y = [-1,1]){
translate([-thickness/2, y*(length+2*(rodRad+3))/2, 0])
rotate([0,-90,0])
cube(size = [2*(rodRad+3),2*(rodRad+3), thickness], center = true);
};
for (y = [-1,1]){ // rod insert---halfway through holder + 1mm so face doesn't line up
translate([1, y*(length+2*(rodRad+3))/2, 0])
rotate([0,-90,0])
cylinder(h=thickness/2+1, r=rodRad);
};
}
difference(){ //magnet trough
translate([0, -length/2, -(magnetWidth+5)/2])
rotate([0,-90,0])
cube([magnetWidth+5, magnetLength+5, thickness]);
translate([-thicknessMin, -magnetLength/2, -(magnetWidth)/2])
rotate([0,-90,0])
cube([magnetWidth, magnetLength, magnetHeight]);
for (y = [-spacing/2, spacing/2]){
translate([-thicknessMin+3, y, 0]) // cap recessed by 3mm
rotate([0,+90,0])
boltHole(size=3, length=thicknessMin, extraCapHeight=10);
}
}
}
}
module pillar(spacing = 30){
thickness = 10;
width = 50;
length = 80;
cavitySideThickness = 10;
cavityEndThickness = 10; // shouldn't be smaller than 10 or nut hole is too far in
// Rack parameters
innerRadius=0;//shaft radius, in mm
borders=5;//how thick should the borders around the central "shaft" be, in mm
translate([0, -width/2, -thickness/2])
difference(){
cube([length,width,thickness]);
for (r_z = [0,180]){
translate([length/2, width/2, 0])
rotate([0,0,r_z])
translate([-length/2, -width/2, 0]) // center piece before rotation
for (y = [width/2-spacing/2, width/2+spacing/2]){ // M3 nut/bolt holes
translate([length-5, y, -1])
rotate([0,0,-90])
linear_extrude(height=thickness/2+3.2+1)
nutHole(size=3, proj=2);
$fn=50;
translate([length-5, y, thickness/2])
rotate([0,90,0])
linear_extrude(height=6) boltHole(size=3, proj=1);
}
}
translate([cavityEndThickness, cavitySideThickness, -1])
cube([length-cavityEndThickness*2, width-cavitySideThickness*2, thickness+2]);
}
translate([length/2+2, -width/2+7.3, -borders+2])
rotate([0,0,180])
rack(innerRadius, borders, 180/circular_pitch*20, 10, pressureAngle*pi/180, centerAngle);
}
module endPlate(spacing = 30){
thickness = 10;
length = magnetLength+5;
$fn=50;
union(){
translate([0, -length/2, -thickness/2])
difference(){
cube([thickness, length, thickness]);
for (y = [length/2-spacing/2, length/2+spacing/2]){
translate([thickness-6, y, thickness/2]) // cap recessed by 6mm
rotate([0,-90,0])
boltHole(size=3, length=thickness, extraCapHeight=10);
}
}
difference(){// rod holders
for (y = [-1,1]){
translate([thickness/2, y*(magnetLength+5+2*(rodRad+3))/2, 0])
rotate([0,90,0])
cube(size = [2*(rodRad+3),2*(rodRad+3), thickness], center = true);
};
for (y = [-1,1]){ // rod insert---halfway through holder + 1mm so face doesn't line up
translate([-1, y*(magnetLength+5+2*(rodRad+3))/2, 0])
rotate([0,90,0])
cylinder(h=thickness/2+1, r=rodRad);
};
}
}
}
module motorSide(){
$fn=50;
thickness = 4;
length = 50;
width = (magnetLength+5)+(2*(rodRad+3))+(linearBearingOD+3);
difference(){
union(){
difference(){
union(){
difference(){ // main platform
translate([0,0,thickness/2])
cube([length, width, thickness], center = true);
linear_extrude(height = thickness+1)
stepper_motor_mount(17, tolerance=tolerance);
}
for (y = [-1, 1]){ // bearing blocks
translate([0, y*(magnetLength+5+2*(rodRad+3))/2, 15/2])
cube([linearBearingHeight+5, linearBearingOD+20, 15], center = true);
}
}
for (y = [-1, 1]){ // bolt holes
translate([-linearBearingHeight/2, y*(magnetLength+5+2*(rodRad+3))/2, 15])
union(){
rotate([0,90,0])
cylinder(h = linearBearingHeight, r = linearBearingOD/2); //bearing
translate([-3.5,0,0])
rotate([0,90,0])
cylinder(h = linearBearingHeight+7, r = rodRad+1); //shaft clearance
for (i = [-1, 1]){
translate([linearBearingHeight/2, i*(linearBearingOD/2+4), -16]) // bolts
linear_extrude(height=15+2) boltHole(size = 3, proj = 1);
translate([linearBearingHeight/2, i*(linearBearingOD/2+4), -(15+12)+10]) // nuts
linear_extrude(height=10+2) nutHole(size = 3, proj = 1);
}
}
}
}
rotate([0,0,180])
translate([length/2-3, 0, 0]){
translate([0, 0, (thickness+2)/2])
difference(){
cube([10.6, 19.8, thickness+2], center = true);
cube([11, 3, thickness+3], center = true);
}
}
}
rotate([0,0,180])
translate([length/2-3, 0, thickness+2])
microswitch(mockup = true, holeDepth = thickness+5, nutSpacing = 3);
}
}
module bearingClamp(){
$fn=50;
difference(){
translate([0, 0, (linearBearingOD/2+5)/2])
cube([linearBearingHeight+5, linearBearingOD+20, linearBearingOD/2+5], center = true);
translate([-linearBearingHeight/2, 0, 0])
union(){
rotate([0,90,0])
cylinder(h = linearBearingHeight, r = linearBearingOD/2); //bearing
translate([-3.5,0,0])
rotate([0,90,0])
cylinder(h = linearBearingHeight+7, r = rodRad+1); //shaft clearance
for (i = [-1, 1]){
translate([linearBearingHeight/2, i*(linearBearingOD/2+4), (linearBearingOD/2+5)-6]) // bolts
rotate([0,180,0])
boltHole(size = 3, length = 15+2, proj = -1, extraCapHeight = 8);
}
}
}
}
module pinion(teeth){
//double helical gear
$fn=50;
twist=centerAngle;
height=12;
pressure_angle=pressureAngle;
trap_width = 6; //nut trap width across flats
hardware_bore = 3.4; //set screw clearence hole
bore_diameter = innerRadius;
//sets nut trap boss dimensions
boss_length = 15/2 + 1;
boss_width = trap_width + 3;
trap_length = trap_width/2;
mirror([0,0,1])
gear (number_of_teeth=teeth,
circular_pitch=circular_pitch,
pressure_angle=pressure_angle,
clearance = 0.2,
gear_thickness = height/2,
rim_thickness = height/2,
rim_width = 10,
hub_thickness = height/2,
hub_diameter=15,
bore_diameter=bore_diameter,
circles=4,
twist=twist,
backlash=backlash);
difference()
{
union() //gear with boss for hardware on it
{
gear (number_of_teeth=teeth,
circular_pitch=circular_pitch,
pressure_angle=pressure_angle,
clearance = 0.2,
gear_thickness = height/2,
rim_thickness = height/2,
rim_width = 10,
hub_thickness = height,
hub_diameter=17,
bore_diameter=bore_diameter,
circles=4,
twist=twist,
backlash=backlash);
translate([bore_diameter/2, -boss_width/2, height/2]) //center the cube
cube([boss_length-bore_diameter/2, boss_width, height/2]); //boss the set screw lives in
}
union() //set screw hardware removed parts
{
translate([bore_diameter/2+1.3, -trap_width/2, height-trap_width*1.2])
cube([trap_length,trap_width,trap_width*1.3]); //nut trap box
translate([0, 0, height-0.6*trap_width]) //shift up
rotate([0,90,0]) //lay flat
cylinder(h=boss_length+1, r = hardware_bore/2); //hardware hole
}
}
}
module microswitch(mockup = true, holeDepth = 0, nutSpacing = 0){
$fn = 50;
translate([-10.6/2, -19.8/2, 0]){
if (mockup == true){
%cube([10.6, 19.8, 6.4]);
}
for (y = [5.1,14.6]){
translate([2.9, y, -holeDepth]){
cylinder(h=6.4+holeDepth, r=2.5/2); //M2.5 holes
hexagon_prism(height = holeDepth-nutSpacing, radius = 2.55);
}
}
}
}
\ No newline at end of file
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment