Loading lego_compatibility.scad 0 → 100644 +157 −0 Changes for lego_compatibility.scad: 157 added lines, 0 removed lines. Original line number Original line Diff line number Diff line // This file is placed under the public domain // from: http://www.thingiverse.com/thing:9512 // EXAMPLES: // standard LEGO 2x1 tile has no pin // block(1,2,1/3,reinforcement=false,flat_top=true); // standard LEGO 2x1 flat has pin // block(1,2,1/3,reinforcement=true); // standard LEGO 2x1 brick has pin // block(1,2,1,reinforcement=true); // standard LEGO 2x1 brick without pin // block(1,2,1,reinforcement=false); // standard LEGO 2x1x5 brick has no pin and has hollow knobs // block(1,2,5,reinforcement=false,hollow_knob=true); knob_diameter=4.8; //knobs on top of blocks knob_height=2; knob_spacing=8.0; wall_thickness=1.45; roof_thickness=1.05; block_height=9.5; pin_diameter=3; //pin for bottom blocks with width or length of 1 post_diameter=6.5; reinforcing_width=1.5; axle_spline_width=2.0; axle_diameter=5; cylinder_precision=0.5; /* EXAMPLES: block(2,1,1/3,axle_hole=false,circular_hole=true,reinforcement=true,hollow_knob=true,flat_top=true); translate([50,-10,0]) block(1,2,1/3,axle_hole=false,circular_hole=true,reinforcement=false,hollow_knob=true,flat_top=true); translate([10,0,0]) block(2,2,1/3,axle_hole=false,circular_hole=true,reinforcement=true,hollow_knob=true,flat_top=true); translate([30,0,0]) block(2,2,1/3,axle_hole=false,circular_hole=true,reinforcement=true,hollow_knob=false,flat_top=false); translate([50,0,0]) block(2,2,1/3,axle_hole=false,circular_hole=true,reinforcement=true,hollow_knob=true,flat_top=false); translate([0,20,0]) block(3,2,2/3,axle_hole=false,circular_hole=true,reinforcement=true,hollow_knob=true,flat_top=false); translate([20,20,0]) block(3,2,1,axle_hole=true,circular_hole=false,reinforcement=true,hollow_knob=false,flat_top=false); translate([40,20,0]) block(3,2,1/3,axle_hole=false,circular_hole=false,reinforcement=false,hollow_knob=false,flat_top=false); translate([0,-10,0]) block(1,5,1/3,axle_hole=true,circular_hole=false,reinforcement=true,hollow_knob=false,flat_top=false); translate([0,-20,0]) block(1,5,1/3,axle_hole=true,circular_hole=false,reinforcement=true,hollow_knob=true,flat_top=false); translate([0,-30,0]) block(1,5,1/3,axle_hole=true,circular_hole=false,reinforcement=true,hollow_knob=true,flat_top=true); //*/ module block(width,length,height,axle_hole=false,reinforcement=false, hollow_knob=false, flat_top=false, circular_hole=false, solid_bottom=true, center=false) { overall_length=(length-1)*knob_spacing+knob_diameter+wall_thickness*2; overall_width=(width-1)*knob_spacing+knob_diameter+wall_thickness*2; center= center==true ? 1 : 0; translate(center*[-overall_length/2, -overall_width/2, 0]) union() { difference() { union() { // body: cube([overall_length,overall_width,height*block_height]); // knobs: if (flat_top != true) translate([knob_diameter/2+wall_thickness,knob_diameter/2+wall_thickness,0]) for (ycount=[0:width-1]) for (xcount=[0:length-1]) { translate([xcount*knob_spacing,ycount*knob_spacing,0]) difference() { cylinder(r=knob_diameter/2,h=block_height*height+knob_height,$fs=cylinder_precision); if (hollow_knob==true) translate([0,0,-roof_thickness]) cylinder(r=pin_diameter/2,h=block_height*height+knob_height+2*roof_thickness,$fs=cylinder_precision); } } } // hollow bottom: if (solid_bottom == false) translate([wall_thickness,wall_thickness,-roof_thickness]) cube([overall_length-wall_thickness*2,overall_width-wall_thickness*2,block_height*height]); // flat_top -> groove around bottom if (flat_top == true) { translate([-wall_thickness/2,-wall_thickness*2/3,-wall_thickness/2]) cube([overall_length+wall_thickness,wall_thickness,wall_thickness]); translate([-wall_thickness/2,overall_width-wall_thickness/3,-wall_thickness/2]) cube([overall_length+wall_thickness,wall_thickness,wall_thickness]); translate([-wall_thickness*2/3,-wall_thickness/2,-wall_thickness/2]) cube([wall_thickness,overall_width+wall_thickness,wall_thickness]); translate([overall_length-wall_thickness/3,0,-wall_thickness/2]) cube([wall_thickness,overall_width+wall_thickness,wall_thickness]); } if (axle_hole==true) if (width>1 && length>1) for (ycount=[1:width-1]) for (xcount=[1:length-1]) translate([xcount*knob_spacing,ycount*knob_spacing,roof_thickness]) axle(height); if (circular_hole==true) if (width>1 && length>1) for (ycount=[1:width-1]) for (xcount=[1:length-1]) translate([xcount*knob_spacing,ycount*knob_spacing,roof_thickness]) cylinder(r=knob_diameter/2, h=height*block_height+roof_thickness/4,$fs=cylinder_precision); } if (reinforcement==true && width>1 && length>1) difference() { for (ycount=[1:width-1]) for (xcount=[1:length-1]) translate([xcount*knob_spacing,ycount*knob_spacing,0]) reinforcement(height); for (ycount=[1:width-1]) for (xcount=[1:length-1]) translate([xcount*knob_spacing,ycount*knob_spacing,-roof_thickness/2]) cylinder(r=knob_diameter/2, h=height*block_height+roof_thickness, $fs=cylinder_precision); } // posts: if (solid_bottom == false) if (width>1 && length>1) for (ycount=[1:width-1]) for (xcount=[1:length-1]) translate([xcount*knob_spacing,ycount*knob_spacing,0]) post(height); if (reinforcement == true && width==1 && length!=1) for (xcount=[1:length-1]) translate([xcount*knob_spacing,overall_width/2,0]) cylinder(r=pin_diameter/2,h=block_height*height,$fs=cylinder_precision); if (reinforcement == true && length==1 && width!=1) for (ycount=[1:width-1]) translate([overall_length/2,ycount*knob_spacing,0]) cylinder(r=pin_diameter/2,h=block_height*height,$fs=cylinder_precision); } } module post(height) { difference() { cylinder(r=post_diameter/2, h=height*block_height-roof_thickness/2,$fs=cylinder_precision); translate([0,0,-roof_thickness/2]) cylinder(r=knob_diameter/2, h=height*block_height+roof_thickness/4,$fs=cylinder_precision); } } module reinforcement(height) { union() { translate([0,0,height*block_height/2]) union() { cube([reinforcing_width,knob_spacing+knob_diameter+wall_thickness/2,height*block_height],center=true); rotate(v=[0,0,1],a=90) cube([reinforcing_width,knob_spacing+knob_diameter+wall_thickness/2,height*block_height], center=true); } } } module axle(height) { translate([0,0,height*block_height/2]) union() { cube([axle_diameter,axle_spline_width,height*block_height],center=true); cube([axle_spline_width,axle_diameter,height*block_height],center=true); } } multiply.scad 0 → 100644 +29 −0 Changes for multiply.scad: 29 added lines, 0 removed lines. Original line number Original line Diff line number Diff line /* * Multiplication along certain curves * * Copyright by Elmo Mäntynen, 2012. * Licenced under LGPL2 or later */ include <units.scad> use <utilities.scad> // TODO check that the axis parameter works as intended // Duplicate everything $no of times around an $axis, for $angle/360 rounds module spin(no, angle=360, axis=Z){ for (i = [1:no]){ rotate(normalized_axis(axis)*angle*no/i) union(){ for (i = [0 : $children-1]) child(i); } } } //Doesn't work currently module duplicate(axis=Z) spin(no=2, axis=axis) child(0); module linear_multiply(no, separation, axis=Z){ for (i = [0:no-1]){ translate(i*separation*axis) child(0); } } regular_shapes.scad +7 −0 Changes for regular_shapes.scad: 7 added lines, 0 removed lines. Original line number Original line Diff line number Diff line Loading @@ -76,6 +76,13 @@ module dodecagon(radius) reg_polygon(12,radius); reg_polygon(12,radius); } } module ring(inside_diameter, thickness){ difference(){ circle(r=(inside_diameter+thickness*2)/2); circle(r=inside_diameter/2); } } module ellipse(width, height) { module ellipse(width, height) { scale([1, height/width, 1]) circle(r=width/2); scale([1, height/width, 1]) circle(r=width/2); } } Loading units.scad +5 −0 Changes for units.scad: 5 added lines, 0 removed lines. Original line number Original line Diff line number Diff line Loading @@ -10,8 +10,13 @@ mm = 1; cm = 10 * mm; cm = 10 * mm; dm = 100 * mm; dm = 100 * mm; m = 1000 * mm; m = 1000 * mm; inch = 25.4 * mm; inch = 25.4 * mm; X = [1, 0, 0]; Y = [0, 1, 0]; Z = [0, 0, 1]; M3 = 3*mm; M3 = 3*mm; M4 = 4*mm; M4 = 4*mm; M5 = 5*mm; M5 = 5*mm; Loading utilities.scad +3 −11 Changes for utilities.scad: 3 added lines, 11 removed lines. Original line number Original line Diff line number Diff line Loading @@ -15,7 +15,9 @@ function length2(a) = sqrt( a[0]*a[0] + a[1]*a[1] ); function normalized(a) = a / (max(distance([0,0,0], a), 0.00001)); function normalized(a) = a / (max(distance([0,0,0], a), 0.00001)); function normalized_axis(a) = a == "x" ? [1, 0, 0]: a == "y" ? [0, 1, 0]: a == "z" ? [0, 0, 1]: normalized(a); function angleOfNormalizedVector(n) = [0, -atan2(n[2], length2([n[0], n[1]])), atan2(n[1], n[0]) ]; function angleOfNormalizedVector(n) = [0, -atan2(n[2], length2([n[0], n[1]])), atan2(n[1], n[0]) ]; Loading @@ -23,16 +25,6 @@ function angle(v) = angleOfNormalizedVector(normalized(v)); function angleBetweenTwoPoints(a, b) = angle(normalized(b-a)); function angleBetweenTwoPoints(a, b) = angle(normalized(b-a)); // TODO check that the axis parameter works as intended // Duplicate everything $no of times around an $axis, for $angle/360 rounds module spin(no, angle=360, axis=[0, 0, 1]){ for (i = [0:no]){ rotate(normalized(axis)*angle*i/no) union(){ for (i = [0 : $children-1]) child(i); } } } CENTER = 0; CENTER = 0; LEFT = -0.5; LEFT = -0.5; Loading Loading
lego_compatibility.scad 0 → 100644 +157 −0 Changes for lego_compatibility.scad: 157 added lines, 0 removed lines. Original line number Original line Diff line number Diff line // This file is placed under the public domain // from: http://www.thingiverse.com/thing:9512 // EXAMPLES: // standard LEGO 2x1 tile has no pin // block(1,2,1/3,reinforcement=false,flat_top=true); // standard LEGO 2x1 flat has pin // block(1,2,1/3,reinforcement=true); // standard LEGO 2x1 brick has pin // block(1,2,1,reinforcement=true); // standard LEGO 2x1 brick without pin // block(1,2,1,reinforcement=false); // standard LEGO 2x1x5 brick has no pin and has hollow knobs // block(1,2,5,reinforcement=false,hollow_knob=true); knob_diameter=4.8; //knobs on top of blocks knob_height=2; knob_spacing=8.0; wall_thickness=1.45; roof_thickness=1.05; block_height=9.5; pin_diameter=3; //pin for bottom blocks with width or length of 1 post_diameter=6.5; reinforcing_width=1.5; axle_spline_width=2.0; axle_diameter=5; cylinder_precision=0.5; /* EXAMPLES: block(2,1,1/3,axle_hole=false,circular_hole=true,reinforcement=true,hollow_knob=true,flat_top=true); translate([50,-10,0]) block(1,2,1/3,axle_hole=false,circular_hole=true,reinforcement=false,hollow_knob=true,flat_top=true); translate([10,0,0]) block(2,2,1/3,axle_hole=false,circular_hole=true,reinforcement=true,hollow_knob=true,flat_top=true); translate([30,0,0]) block(2,2,1/3,axle_hole=false,circular_hole=true,reinforcement=true,hollow_knob=false,flat_top=false); translate([50,0,0]) block(2,2,1/3,axle_hole=false,circular_hole=true,reinforcement=true,hollow_knob=true,flat_top=false); translate([0,20,0]) block(3,2,2/3,axle_hole=false,circular_hole=true,reinforcement=true,hollow_knob=true,flat_top=false); translate([20,20,0]) block(3,2,1,axle_hole=true,circular_hole=false,reinforcement=true,hollow_knob=false,flat_top=false); translate([40,20,0]) block(3,2,1/3,axle_hole=false,circular_hole=false,reinforcement=false,hollow_knob=false,flat_top=false); translate([0,-10,0]) block(1,5,1/3,axle_hole=true,circular_hole=false,reinforcement=true,hollow_knob=false,flat_top=false); translate([0,-20,0]) block(1,5,1/3,axle_hole=true,circular_hole=false,reinforcement=true,hollow_knob=true,flat_top=false); translate([0,-30,0]) block(1,5,1/3,axle_hole=true,circular_hole=false,reinforcement=true,hollow_knob=true,flat_top=true); //*/ module block(width,length,height,axle_hole=false,reinforcement=false, hollow_knob=false, flat_top=false, circular_hole=false, solid_bottom=true, center=false) { overall_length=(length-1)*knob_spacing+knob_diameter+wall_thickness*2; overall_width=(width-1)*knob_spacing+knob_diameter+wall_thickness*2; center= center==true ? 1 : 0; translate(center*[-overall_length/2, -overall_width/2, 0]) union() { difference() { union() { // body: cube([overall_length,overall_width,height*block_height]); // knobs: if (flat_top != true) translate([knob_diameter/2+wall_thickness,knob_diameter/2+wall_thickness,0]) for (ycount=[0:width-1]) for (xcount=[0:length-1]) { translate([xcount*knob_spacing,ycount*knob_spacing,0]) difference() { cylinder(r=knob_diameter/2,h=block_height*height+knob_height,$fs=cylinder_precision); if (hollow_knob==true) translate([0,0,-roof_thickness]) cylinder(r=pin_diameter/2,h=block_height*height+knob_height+2*roof_thickness,$fs=cylinder_precision); } } } // hollow bottom: if (solid_bottom == false) translate([wall_thickness,wall_thickness,-roof_thickness]) cube([overall_length-wall_thickness*2,overall_width-wall_thickness*2,block_height*height]); // flat_top -> groove around bottom if (flat_top == true) { translate([-wall_thickness/2,-wall_thickness*2/3,-wall_thickness/2]) cube([overall_length+wall_thickness,wall_thickness,wall_thickness]); translate([-wall_thickness/2,overall_width-wall_thickness/3,-wall_thickness/2]) cube([overall_length+wall_thickness,wall_thickness,wall_thickness]); translate([-wall_thickness*2/3,-wall_thickness/2,-wall_thickness/2]) cube([wall_thickness,overall_width+wall_thickness,wall_thickness]); translate([overall_length-wall_thickness/3,0,-wall_thickness/2]) cube([wall_thickness,overall_width+wall_thickness,wall_thickness]); } if (axle_hole==true) if (width>1 && length>1) for (ycount=[1:width-1]) for (xcount=[1:length-1]) translate([xcount*knob_spacing,ycount*knob_spacing,roof_thickness]) axle(height); if (circular_hole==true) if (width>1 && length>1) for (ycount=[1:width-1]) for (xcount=[1:length-1]) translate([xcount*knob_spacing,ycount*knob_spacing,roof_thickness]) cylinder(r=knob_diameter/2, h=height*block_height+roof_thickness/4,$fs=cylinder_precision); } if (reinforcement==true && width>1 && length>1) difference() { for (ycount=[1:width-1]) for (xcount=[1:length-1]) translate([xcount*knob_spacing,ycount*knob_spacing,0]) reinforcement(height); for (ycount=[1:width-1]) for (xcount=[1:length-1]) translate([xcount*knob_spacing,ycount*knob_spacing,-roof_thickness/2]) cylinder(r=knob_diameter/2, h=height*block_height+roof_thickness, $fs=cylinder_precision); } // posts: if (solid_bottom == false) if (width>1 && length>1) for (ycount=[1:width-1]) for (xcount=[1:length-1]) translate([xcount*knob_spacing,ycount*knob_spacing,0]) post(height); if (reinforcement == true && width==1 && length!=1) for (xcount=[1:length-1]) translate([xcount*knob_spacing,overall_width/2,0]) cylinder(r=pin_diameter/2,h=block_height*height,$fs=cylinder_precision); if (reinforcement == true && length==1 && width!=1) for (ycount=[1:width-1]) translate([overall_length/2,ycount*knob_spacing,0]) cylinder(r=pin_diameter/2,h=block_height*height,$fs=cylinder_precision); } } module post(height) { difference() { cylinder(r=post_diameter/2, h=height*block_height-roof_thickness/2,$fs=cylinder_precision); translate([0,0,-roof_thickness/2]) cylinder(r=knob_diameter/2, h=height*block_height+roof_thickness/4,$fs=cylinder_precision); } } module reinforcement(height) { union() { translate([0,0,height*block_height/2]) union() { cube([reinforcing_width,knob_spacing+knob_diameter+wall_thickness/2,height*block_height],center=true); rotate(v=[0,0,1],a=90) cube([reinforcing_width,knob_spacing+knob_diameter+wall_thickness/2,height*block_height], center=true); } } } module axle(height) { translate([0,0,height*block_height/2]) union() { cube([axle_diameter,axle_spline_width,height*block_height],center=true); cube([axle_spline_width,axle_diameter,height*block_height],center=true); } }
multiply.scad 0 → 100644 +29 −0 Changes for multiply.scad: 29 added lines, 0 removed lines. Original line number Original line Diff line number Diff line /* * Multiplication along certain curves * * Copyright by Elmo Mäntynen, 2012. * Licenced under LGPL2 or later */ include <units.scad> use <utilities.scad> // TODO check that the axis parameter works as intended // Duplicate everything $no of times around an $axis, for $angle/360 rounds module spin(no, angle=360, axis=Z){ for (i = [1:no]){ rotate(normalized_axis(axis)*angle*no/i) union(){ for (i = [0 : $children-1]) child(i); } } } //Doesn't work currently module duplicate(axis=Z) spin(no=2, axis=axis) child(0); module linear_multiply(no, separation, axis=Z){ for (i = [0:no-1]){ translate(i*separation*axis) child(0); } }
regular_shapes.scad +7 −0 Changes for regular_shapes.scad: 7 added lines, 0 removed lines. Original line number Original line Diff line number Diff line Loading @@ -76,6 +76,13 @@ module dodecagon(radius) reg_polygon(12,radius); reg_polygon(12,radius); } } module ring(inside_diameter, thickness){ difference(){ circle(r=(inside_diameter+thickness*2)/2); circle(r=inside_diameter/2); } } module ellipse(width, height) { module ellipse(width, height) { scale([1, height/width, 1]) circle(r=width/2); scale([1, height/width, 1]) circle(r=width/2); } } Loading
units.scad +5 −0 Changes for units.scad: 5 added lines, 0 removed lines. Original line number Original line Diff line number Diff line Loading @@ -10,8 +10,13 @@ mm = 1; cm = 10 * mm; cm = 10 * mm; dm = 100 * mm; dm = 100 * mm; m = 1000 * mm; m = 1000 * mm; inch = 25.4 * mm; inch = 25.4 * mm; X = [1, 0, 0]; Y = [0, 1, 0]; Z = [0, 0, 1]; M3 = 3*mm; M3 = 3*mm; M4 = 4*mm; M4 = 4*mm; M5 = 5*mm; M5 = 5*mm; Loading
utilities.scad +3 −11 Changes for utilities.scad: 3 added lines, 11 removed lines. Original line number Original line Diff line number Diff line Loading @@ -15,7 +15,9 @@ function length2(a) = sqrt( a[0]*a[0] + a[1]*a[1] ); function normalized(a) = a / (max(distance([0,0,0], a), 0.00001)); function normalized(a) = a / (max(distance([0,0,0], a), 0.00001)); function normalized_axis(a) = a == "x" ? [1, 0, 0]: a == "y" ? [0, 1, 0]: a == "z" ? [0, 0, 1]: normalized(a); function angleOfNormalizedVector(n) = [0, -atan2(n[2], length2([n[0], n[1]])), atan2(n[1], n[0]) ]; function angleOfNormalizedVector(n) = [0, -atan2(n[2], length2([n[0], n[1]])), atan2(n[1], n[0]) ]; Loading @@ -23,16 +25,6 @@ function angle(v) = angleOfNormalizedVector(normalized(v)); function angleBetweenTwoPoints(a, b) = angle(normalized(b-a)); function angleBetweenTwoPoints(a, b) = angle(normalized(b-a)); // TODO check that the axis parameter works as intended // Duplicate everything $no of times around an $axis, for $angle/360 rounds module spin(no, angle=360, axis=[0, 0, 1]){ for (i = [0:no]){ rotate(normalized(axis)*angle*i/no) union(){ for (i = [0 : $children-1]) child(i); } } } CENTER = 0; CENTER = 0; LEFT = -0.5; LEFT = -0.5; Loading